Version includes a special memory bank containing the five 60-meter channels, as well. Continuous receiver coverage from 30 kHz to 60 MHz is provided. Note: frequency coverage may differ in your country. The power of IF Digital Signal Processing (DSP) is yours to enjoy with the FT-2000.
Variable IF Width and IF Shift allow precise interference rejection, and the receiver DSP also includes an Auto-Notch, Manual Notch, Digital Noise Reduction, and a continuously-variable pass band Contour control. The WIDTH control has a mode-determined adjustment range of 200 Hz - 4 kHz for SSB, and 25 Hz to 2.4 kHz on CW, and a mode-optimized Narrow key provides one-touch narrowing of the bandwidth to a user-determined preset value. With the FT-2000, you have tremendous control over the fidelity and/or talk power of your SSB signal, thanks to the variable SSB bandwidth capability in the Menu. The power of DSP also provides tremendous benefits for transmission, as well as reception.
The Three-Band Parametric Microphone Equalizer allows unmatched capability to tailor your speech characteristics: in each of the three bands, you may adjust the center frequency of the equalization, the frequency spread over which the equalization is applied, and the amplitude (peaking or nulling) within that equalization range. The result is sparkling, clear audio that will be the envy of everyone else on the band! Following in the renowned path of the FTDX9000, the FT-2000 is crafted with a comprehensive design view that accounts for all aspects of the strong signal environment, and especially with optimization of weak-signal in a multiple-strong-signal environment. The receiver of the FT-2000 is a triple-conversion type, utilizing great care in the gain distribution through all IF stages. The first mixer is a GaAs FET Doubly-Balanced Mixer type, fed by a four-VCO PLL synthesizer (30 kHz - 10.5 MHz, 10.5 MHz - 24 MHz, 24 MHz - 39 MHz, and 39 MHz - 56 MHz).
The resulting first IF is at 69.450 MHz, utilizing an up-conversion technique that yields excellent image rejection. FTDX9000-Lineage Triple Roofing Filter System for Crowded Bands (Main Band VFO). The first IF of the FT-2000 features three roofing filters, I bandwidths of 15 kHz, 6 kHz, and 3 kHz, optimized by mode for best performance on today's crowded bands.Especially useful during busy contest weekends, the Roofing Filters are positioned right after the first mixer, improving IP3 (3rd-Order Intercept Point) performance for all stages that follow. The Ultimate Low-Band DXer RF Preselection Filter: YAESU's Exclusive µ-Tuning! On the lower ham bands, the signal voltages impinging on a receiver can create noise and Intermodulation effects that can cover up weak signals you're trying to pull through. So YAESU's engineers developed the µ (Mu) Tuning system for the FTDX9000, and it's now available as an option for the FT-2000. Three modules are available (MTU-160, MTU-80/40, MTU-30/20), and these modules may be connected externally with no internal modification required! When µ-Tuning is engaged, the standard VRF (Variable RF Preselector) system is bypassed, but the fixed Bandpass Filters are still in the received signal path. The µ-Tuning filters utilize a stack of large 1.1 (28 mm) Ni-Zn Ferrite cores, driven through a silver-plated coil assembly by a precision stepper motor. The resulting high Q (typically over 300) provides a very steep resonance peak near your operating frequency.
The peak may be adjusted away from your frequency, for even greater protection from a specific station, and a graphical depiction of the µ-Tune filter alignment appears on the front panel of the transceiver. Unique Receiver Configuration Display When operating at a frantic pace, it's a comfort to have such comprehensive information available on the front panel's huge display. The FT-2000's unique \Receiver Configuration Display calls out status for each step in the receiver's RF and IF, and the fluorescent display also provides both graphical and numerical depiction of the bandwidth and the alignment of the various interference-rejection filters.And the high-resolution analog multi-meter allows you to monitor PO/COMP/SWR/ID/VDD/ALC both effortlessly and precisely. Dual Receive Capability for Effortless Split Operation During Split operation, Dual Receive may be engaged so that you may listen to both sides of the pile-up (or watch a particular frequency on the same band for activity). One push of the appropriate [TX] or [RX] indicator will engage or disengage the receiver or transmitter on the Main or Sub VFO, and the [TXW] (TX Watch) button also lets you listen to your transmit frequency during casual Split operation. The Sub Receiver also has a slot for an optional Collins® Mechanical CW filter, if desired: choose the YF-122C (500 Hz) or the YF-122CN (300 Hz). The Sub Receiver is an analog type, with no DSP filters. Enhance Operation using External Display (option)! This item is in the category "Mobile Phones & Communication\Radio Communication Equipment\Ham/Amateur Radio\Ham Radio Transceivers".radios" and is located in this country: GB. This item can be shipped to United Kingdom.