Upgraded HF Ham Radio 8 Band QRP Radio Kit Multimode by PE1NNZ DL2MAN CW LSB USB

  

Add to my favorite sellers. Upgraded QRP Radio Transceiver 8 Band HF Ham Radio Transceiver Multimode by PE1NNZ DL2MAN CW LSB USB Assembled Kit Feature: 1. High launch efficiency: 80m/60m/40m/30m/20m efficiency can reach more than 80% after adjustment;Use the original magnetic ring of Micrometals; 2.

The magnetic winding wire can be adjusted: The TX efficiency is 5-6W at 12V input and not more than 6.5W at 13.8V input. The magnetic loop winding can be adjusted; 3. RX noise: The RX noise (above -106dBm) is better than the products on the market; RX error sideband suppression is more than 30dB;Harmonic suppression is about -43dB or better; 4. New appearance design: the upper and lower cover plates use PCB, the font is clearer, the size is adjusted by the structural engineer, and the assembly gap is even and beautiful; 5. Optimize PCB board: Optimize PCB board, reduce the possibility of false soldering, and have a higher service life;Optimize display accuracy such as efficiency and standing wave ratio, and make data more reliable. Material: petg Size: about 90 60 30mm/3.542.361.2in Instructions: 1. (tr) uSDX is the successor of the uSDX project.

It is the result of cooperation between PE1NNZ and DL2MAN. The design is intended as an easy to build (pre assembled) kit. (tr) uSDX is a 5-band/multi-mode QRP transceiver in pocket format. At present, it covers 80/60/40/30/20m and will support 17/15/12/10m in the future.

It provides an OLED display, on-board microphone, (tiny) on-board speaker and temporary QSO on-board PTT key which can be used as emergency CW key. (tr) uSDX has a (Micro) USB CAT and programming interface. It provides onboard SWR bridge and voltage/current measurement hardware to help with tuning and operation. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Please allow 1-2cm measuring deviation due to manual measurement.

1 x QRP Radio Transceiver Kit. Please contact me before you return it. If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. If you do not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible. If you have any problems or concerns whatever with your order or products, please message us and give us a chance to assist you before you leave any feedback. We believe we can produce a positive outcome to any situation and will work hard to earn your praise. Our office hours are 9:00 a. M to 6:00 p.

M (GMT +8) of Monday to Saturday. And our Office is closed on Sunday and public holidays. We apologize for the late reply during the holidays. This item is in the category "Mobile Phones & Communication\Radio Communication Equipment\Ham/Amateur Radio\Ham Radio Transceivers".

The seller is "hellobingo" and is located in this country: GB. This item can be shipped to United Kingdom.

• Type: Transceivers
• Size: about 90 * 60 * 30mm/3.54*2.36*1.2in
• Origin: Mainland China
• Model Number: QRP Transceiver
• Material: petg
• Item Weight: 190g
• Fiber Type: Multimode
• Country/Region of Manufacture: China
• Colour: Black
• Brand: Unbranded